Skip to content

Tap Repairs in Carlton

1000+ five-star reviews

A tap that drips, dribbles or refuses to shut off properly is one of the most common callouts we attend, and it gets the same fixed-price, fully licensed treatment as any major job.

  • $0 Call Out Fee
  • Lifetime Labour Warranty
  • Licensed & Insured
  • Lic #275278C
  • Licensed & Insured
  • $0 Call Out Fee
  • Lifetime Labour Warranty
  • On-Site Fast, 24/7
  • 1000+ five-star reviews
  • Real Humans Answer, Day or Night
  • Lic #275278C
  • Licensed & Insured
  • $0 Call Out Fee
  • Lifetime Labour Warranty
  • On-Site Fast, 24/7
  • 1000+ five-star reviews
  • Real Humans Answer, Day or Night
  • Lic #275278CNSW plumbing licence, fully insured, water and gas
  • $0 Call Out FeeIt costs nothing to get us to your door
  • Lifetime Labour WarrantyIf it's not right, we come back. No questions. No cost.
  • 1000+ five-star reviewsSydney homeowners have rated us five stars over a thousand times
Assembling pipe fittings before installation

Every drip has a reason, and finding it is the whole job

A tap is the most used fitting in any house, so when one starts misbehaving it is telling you something about the washer, the cartridge or the pipe behind it. Guessing at the cause means the drip returns in a month.

It is also one of the everyday jobs our Carlton plumbing team handles constantly, alongside shower and leaking shower repairs where the tapware and the shower often share the same worn internals.

Call (02) 9072 0520
A plumber working on a bathroom call-out

A century of hardware still turning daily

Original fittings, still in service

Many cottages around the 1890s and early 1900s subdivisions have never had their tapware renewed, so pillar taps, bib taps and laundry trough fittings from several different generations sit side by side, and sourcing parts for each era is a speciality rather than a guess.

Galvanised supplies behind the wall

Where these older homes have dodged renovation, the original galvanised supply pipes have corroded inward over a century, so a tap that drips is sometimes the least of what is happening at that fixture.

Pressure that tells a story

One side of a sink running weakly while the other flows strongly usually points to the pipe run or a partly blocked aerator rather than the tap itself, and diagnosing that difference is where the real repair starts.
Call (02) 9072 0520

What we fix, from washers to full tap renewals

The difference is in the matching. Tap work looks simple from outside, but the difference between a lasting repair and a repeat call comes down to matching the parts and the method to the fitting's age.

Stocked for the first visit. Our vans carry washers, O-rings, spindles and the common cartridges, so most jobs finish on the first visit, and where a tap has reached the end of its life we renew it properly. The same attention applies across the wet areas of the house, including kitchen plumbing where sink mixers take the heaviest daily punishment.

Dripping spouts and weeping handles

Dripping spouts and weeping handles usually come down to worn washers or perished O-rings, so we strip the tap, fit quality replacements matched to the fixture's age, and reseat the seat where decades of wear have cut it unevenly.

Mixer cartridge replacement

Mixer taps dominate kitchens and bathrooms now, and a cartridge that has hardened or clogged with scale is the reason a lever stops closing cleanly, so we source the correct cartridge and fit it without disturbing the bench or the tiles.

Laundry troughs and outdoor bib taps

Laundry troughs and garden taps work hardest of all the fixtures, and on the older streets many still run original bib fittings whose threads have corroded, so we renew the tap, its backplate and the connection back to sound pipe.

Tap replacement suited to the house

Where a tap is beyond economic repair, we supply and install replacements suited to the house, from period-appropriate pillar taps for a Federation bathroom to sleek mixers for a renovated flat, always with isolation valves fitted for easy future servicing.

The van stocked with parts to fix it on the first visit

Clay soil, hard summers and the southern streets

Ground movement works on tap bodies

Reactive clay and shale under these streets swell and shrink between wet and dry months, and rigid tap bodies and wall outlets take up that strain, which is why a mixer that behaved all winter starts weeping in spring.

The quiet southern streets

Around the church-going streets near St Bernadette's, interwar cottages on generous blocks run outdoor troughs and garden bib taps that cop more sun, more weather and more hard turning than anything inside the house, and they fail on their own schedule.
Call (02) 9072 0520

Tap problems we see week after week

A handle that needs two hands

A handle that needs two hands to turn usually means a cartridge or spindle corroded solid, common where hard-working taps have gone years without service, and forcing it risks snapping the stem inside the body, which turns a small job into a bigger one.

Rust-tinted water or a fading stream

Rust-tinted water or a trickle where a stream used to be points past the tap itself, because galvanised supply lines in the unrenovated cottages corrode inward until the bore narrows, and the honest fix is renewing the pipe run, not another washer.

Where the leak is not at the fixture at all, leak detection finds the true source without opening walls on a guess.

Why a small drip deserves a quick call

Putting off a tap repair is the most common plumbing decision in the district, and it is the one that costs the most over time.

The waste never stops

A tap dripping once per second sends thousands of litres down the drain across a year, quietly inflating the water bill for a problem a washer would have fixed in an hour.

Stains and scale spread

A weeping spout or a shower head that spits leaves mineral staining on tiles, basins and troughs, and once that scale sets in it takes far more than a wipe to remove.

Small faults grow into big ones

A worn washer is a ten-minute fix, but the same tap left dripping can seize, corrode or start damaging the cupboard or wall around it, turning minor work into renewal work.

How it works

Our tap repair process, step by step

Tap work follows the same disciplined path as every job we run, so you know the price before anything begins.

  1. 01

    Call and tell us

    Ring (02) 9072 0520 and describe what's happening, and a licensed plumber, not an answering machine, will tell you what it likely means, what to stop using, and when we can realistically be there.

  2. 02

    Quote before work

    Your plumber inspects the job properly, runs whatever diagnosis it genuinely needs, and hands you a single fixed written price covering the complete fix, with a $0 call out fee and nothing added afterwards.

  3. 03

    Service the tap

    Your plumber strips the tap or mixer on the bench, replaces every washer, O-ring, spindle or cartridge the diagnosis called for, reseats or renews the body where needed, then runs the tap hard and checks the connections dry before packing up.

  4. 04

    Backed for life

    Everything we complete is covered by our Lifetime Labour Warranty, the promise that outlasts the job itself: if it's not right, we come back. No questions. No cost.

Why choose Your Plumber Carlton

Fixed prices, kept

Every job is priced upfront in plain writing before any work starts, the invoice always matches that number, and weekend or late-evening timing changes nothing, because overtime rates simply don't exist here.

Licensed and insured

Your Plumber Carlton works under licence #275278C with full insurance behind every job, and the compliance certificates that protect your home's paperwork trail arrive with the invoice, without you ever needing to ask for them.

Lifetime Labour Warranty

Workmanship here is guaranteed for life under our Lifetime Labour Warranty rather than for a warranty card's fine-print window, which says more about how the work is done in the first place than any advertisement could.

Genuinely local response

We work these streets constantly rather than commuting in from across Sydney, so the van reaching you has usually just left a job nearby, stocked for the faults the local houses actually develop.

Tap work is where those promises get tested fastest, because it is the repair most households postpone until the drip finally wins. The same team also handles planned servicing through maintenance plumbing, which catches worn tap hardware before it starts dripping in the first place.

Where we work

Neighbourhoods our vans also cover

Our vans also cover Allawah, Beverley Park, Kogarah Bay, Kogarah and South Hurstville, where the same blend of Federation cottages, post-war brick flats and leafy older streets keeps worn washers, stiff cartridges and corroded bib taps in steady supply.

Good questions, straight answers

Questions Carlton locals ask about tap repairs

How much does a tap repair cost?

Every job starts with a $0 call out and a fixed written price before any work begins, so you approve the exact figure for your tap repair before a single tool comes out.

Can you fix a dripping tap on the same day?

Most tap repairs are finished on the first visit because our vans carry common washers, cartridges and valves, and if a special part is needed we order it and return promptly.

Is a leaking mixer tap repaired differently to an older tap?

Yes, mixers rely on a cartridge inside the body while older pillar and bib taps use washers and spindles, and we carry parts for both eras of hardware found locally.

Are your plumbers licensed for tap and water supply work?

Every plumber on the team is fully licensed and insured under licence #275278C, and the compliance paperwork for any supply work we complete arrives with the invoice without you needing to ask.

What warranty covers a tap repair?

All workmanship is covered by our Lifetime Labour Warranty, which means if a repaired tap is not right we come back and make it right at no cost to you.

Why do taps fail faster in some streets than others?

Age matters more than address, because the unrenovated Federation cottages still run original hardware and galvanised supply lines, while renovated homes and the post-war flats mostly fail at cartridges and flexi connections.

Dripping tap in Carlton? Call now and we will sort it out today

Call (02) 9072 0520 now and speak straight to a licensed plumber, day or night. The call out fee is $0, the price goes on paper before a tool comes off the van, and every repair is backed by our Lifetime Labour Warranty.

Every other service we carry, from drains to hot water, is listed back at home.

Call Now